Jailbreak iPhone/iPod Touch/iPad’s iOS 4.1 with Limera1n

The well known iPhone hacker GeoHot has just released the ‘limera1n’ tool which makes it possible to jailbreak iOS 4.1. Good news is that Limra1n is untethered. The untethered feature was actually brought by @comex and is utilized by @geohot.
If you are on iOS 4.1, then head to limera1n.com to get your iGadget Jaibroken. Limra1n supports iPhone 3GS, iPod Touch 3G, iPad, iPhone 4 and iPod Touch 4G running on iOS 4.0 or 4.1. The tool is for Windows at the moment but it is supposed to get Linux and Mac OS support soon.


Please note that limra1n is released just ahead of ‘greenpois0n’ jailbreaking tool which is supposed to be a better one as the hacker @comex claims. We won’t hesitate in believing him because he has proved himself the master as @geohot has used @comex’ untethering feature in limra1n.


Well, if you just need a jailbreak and don’t want to get into a mess, just head to limera1n.com to get it now. If you are on iOS 4.0 and want a Jailbreak, I’d recommend Jailbreakme. And if you are looking for iOS 4.0 unlock, then you can do it in just 5 minutes!


Source URL: https://k12-information.blogspot.com/search/label/jailbreak%20iPad
Visit Techno Information for Daily Updated Hairstyles Collection

How To Jailbreak iPad 1 Using Redsn0w For iOS 4.3.5 [Windows / Mac]

You can follow these step-by-step instructions to jailbreak your iPad 1:
Step 1: Download Redsn0w 0.9.8b4 (Mac and Windows) and save the application in a folder named "Redsn0w" on your desktop.
Step 2: You need to download both the iOS 4.3.4 and iOS 4.3.5 firmware files (use Firefox or Chrome to download the firmware file instead of using Internet Explorer or Safari):
iOS 4.3.4 firmware file for iPad 1 (iPad1,1_4.3.4_8K2_Restore.ipsw)
iOS 4.3.5 firmware file for iPad 1 (iPad1,1_4.3.5_8L1_Restore.ipsw)
Step 3: Double click the Redsn0w zip file and extract the application to the Redsn0w folder.
Step 4: Connect your iPad to the computer, which should automatically launch iTunes.Skip steps 5 and 6, if your iPad has already been upgraded to iOS 4.3.5.
Step 5: From the 'Devices' section on the left pane of iTunes, select your iPad device. Now, hold down the Shift button (Option button for Mac users) and click the 'Restore' button.
Step 6: Navigate to the Redsn0w folder on the desktop and select the downloaded iOS 4.3.5 firmware file (iPad1,1_4.3.5_8L1_Restore.ipsw). Click on the 'Choose' button to let iTunes update your iPhone with the required firmware. You will be asked to setup your iPad 1 either from a previous backup or setup as a new iPad, select the backup you want for your device (ideally should be the most recent one).Wait iTunes to finish.

Step 7: Navigate back to the Redsn0w folder and launch the Redsn0w application. Windows 7 users should run the exe in Windows XP compatibility mode. 
Step 8: You will be asked to select the corresponding IPSW file. Click on the Browse button and select the iOS 4.3.4 firmware file (iPad1,1_4.3.4_8K2_Restore.ipsw). Note: iOS 4.3.4 firmware file and not the iOS 4.3.5 firmware file. 
Step 9: Redsn0w will verify the firmware file and inform you if it has successfully identified it. Click on 'Next' to proceed.



Step 10: Redsn0w will now start preparing the jailbreak data.
Step 11: You will now be prompted to select the jailbreak options you would like. Make sure Cydia is selected and select 'Next' to continue.
Step 12: You will now be prompted to switch OFF your iPad and plug it to the computer. Follow the instructions and click on 'Next' to move to the next screen:
Step 13: You will now need to put your iPad into the DFU mode. Redsn0w will take you through the necessary steps:
(a) Hold the Power button on iPad down for 3 seconds:
(b) Now simultaneously hold the iPad and keep the two buttons pressed for 10 seconds:
(c) Now release the Power button while keeping the Home button pressed until Redsn0w identifies the device:
Step 14: Your iPad should reboot now. Please remember to release the Home button.
Step 15: Redsn0w will now begin uploading the new RAM disk and kernel.
Step 16: You will now be notified once the jailbreaking process is complete. Click on the 'Finish' button to exit the application.
Step 17: Your iPad will reboot once again (which could take approximately 5 minutes). After it has rebooted, your iPad should be successfully jailbroken. You should find Cydia jailbreak app on your iPad’s home screen.
Source URL: https://k12-information.blogspot.com/search/label/jailbreak%20iPad
Visit Techno Information for Daily Updated Hairstyles Collection

sn0wbreeze v2.8b7 For iOS 5 beta 7

Install, Activate iOS 5 Beta 7 Without Developer Account, Registered UDID (Links + Full Guide + Jailbreak)  We’re showing in this post an exclusive guide to install and activate iOS 5 beta 7 without developer account or a registered UDID. We will use the Sn0wbreeze 2.8b7 tool to remove the UDID check of iOS 5 beta 7. We’ve tried this guide on a non-developer iPhone 4 and it worked successfully, just follow the below steps carefully and you’ll get iOS 5 beta 7 jailbroken on your iOS device.

This guide supports all devices except iPhone 3GS old bootrom and the iPad 2. You’ll of course need iOS 5 beta 7 firmware .DMG file and iTunes 10.5 beta 7. We’ll show you how to convert .DMG iOS 5 file to .IPSW and install it using iTunes 10.5 beta 7.
How to Install, Activate and Jailbreak iOS 5 Beta 7:
STEP 1: Download iOS 5 beta 7 firmware .DMG file for your iOS device and iTunes 10.5 beta 7 from the links found here.
STEP 2: Get free TransMac to convert / change .DMG file to .IPSW using the video guide here.
STEP 3: Now download Sn0wbreeze 2.8b7 from here.
STEP 4: Open Sn0wbreeze 2.8b7 then hit Browse point and point it to the extracted .IPSW iOS 5 beta 7 file you got from Step 2.


STEP 5: If everything goes okay, you’ll get your device identified as below:

STEP 6: Now click on Expert Mode then Build IPSW.

STEP 7: After building your custom IPSW file of iOS 5 beta 7, you’ll have to get your device in DFU mode. Just follow the on-screen instructions to PWN DFU mode your device.

STEP 8: After getting the black screen on your iOS device, head to the installed iTunes 10.5 beta 7 from Step 1 and open it up.
STEP 9: Before restoring your device, make a backup for your settings, contacts, photos and etc. by right clicking on your iPhone’s icon and hit Backup.
STEP 10: Now, while holding the Shift key, click on Restore and point it to the Sn0wbreeze custom IPSW you’ve already made.
STEP 11: Wait few minutes and you’ll finally get your iPhone, iPad or iPod touch with iOS 5 beta 7.
STEP 12: After done with iOS 5, you’ll need to backup your iOS things. Just open iTunes and restore from your old Backup.
Notes:
- In case you got Error 10, then you’re not using iTunes 10.5 beta 7.
- In case you got other Errors, then you didn’t put your device in DFU mode. Just use iREB (download here) to put your device in PWN DFU mode.
- iOS 5 beta 7 is tethered only jailbroken, so you’ll have to use iBooty (Sn0wbreeze 2.8b7 downloads it in the same directory of your custom IPSW) everytime your iPhone is rebooted to get Cydia installed again.

That’s it! You’ll be able now to enjoy jailbroken iOS 5 beta 7 on your iPhone, iPa and iPod touch. Let us know how it does with you in the comments section below.


Download sn0wbreeze v2.8b7 For iOS 5 beta 7 
Source URL: https://k12-information.blogspot.com/search/label/jailbreak%20iPad
Visit Techno Information for Daily Updated Hairstyles Collection